Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 101-110

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.101

You have a Hyper-V host named Server1 that runs Windows Server 2016. The host has two virtual machines (VMs) named VM1 and VM2.

On the Hyper-V host, you create two virtual disks named Disk1 and Disk2. You plan to create a test environment for Storage Spaces Direct.

You need to configure the VMs to connect to the virtual disks. What should you use?

  1. An iSCSI target

  2. A virtual SCSI controller

  3. A virtual fibre channel adapter

  4. A virtual IDE controller

Correct Answer: B

Explanation:

https://blogs.msdn.microsoft.com/clustering/2015/05/27/testing-storage-spaces-direct-using- windows-server-2016-virtual-machines/

Question No.102

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

  1. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.

  2. From Hyper-V Manager on Server1, modify the settings on VM1.

  3. From Windows PowerShell on Server1, run the Set- VmNetworkAdapterFailoverConfiguration cmdlet.

  4. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Correct Answer: D

Explanation:

https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic- teaming/nic-teaming

Question No.103

You have two servers named Server1 and Server2. A firewall exists between Server1 and Server2.

Both servers run Windows Server Update Services (WSUS). Server1 downloads updates from Microsoft update.

Server2 must synchronize updates from Server1. Which port should to open on the firewall?

A. 80

B.

443

C.

3389

D.

8530

Correct Answer: D

Question No.104

HOTSPOT

You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.

You need to apply patches to Server1.

Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.105

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.

Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Explanation:

This solution only shows the domain FSMO roles, not the forest FSMO roles.

References:

https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo- roles/

Question No.106

HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. You run the commands shown in the following graphic:

image

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Question No.107

Note: This question is part of a series of questions that use the same scenario. For your convenience, ……….. repeated in each question. Each question presents a different goal and answer choices, but the text of ……….. exactly the same in each question in this series.

Start of repeated scenario

Your network contains an Active Directory domain named contoso.com. The functional level of the forest and ………… Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains ………. that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

  1. Add a new virtual network adapter to VM2.

  2. Change the cluster operation mode.

  3. Modify the default rule.

  4. Install the Web Application Proxy server role on VM2 and VM3.

Correct Answer: B

Question No.108

Your Network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network.

During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers.

Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.

What should you do?

  1. From Windows PowerShell, run the Set-DAClient cmdlet.

  2. From Windows PowerShell, run the Set-DirectAccess cmdlet.

  3. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group.

  4. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy.

Correct Answer: D

Question No.109

Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1. What should you do?

  1. Perform tombstone reanimation.

  2. Export and import data by using Dsamain.

  3. Perform a non-authoritative restore.

  4. Recover the items by using Active Directory Recycle Bin.

Correct Answer: B

Explanation:

A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore.

The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.

Question No.110

DRAG DROP

Your network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2. DC2 is a virtual machine that is hosted on a Hyper-V host named HyperV1. DC1 holds the PDC emulator operations master role.

You need to create a new domain controller named DC3 by using domain controller cloning.

Which five actions should you perform in sequence before you can import the cloned virtual machine?

To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

image

Correct Answer:

image

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 51-60

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.51

Your network contains a new Active Directory domain named contoso.com.

You have a security policy that states that new servers should run Nano Server whenever possible.

Which server role can be deployed on a Nano Server?

  1. Active Directory Domain Services

  2. DHCP Server

  3. Network Policy and Access Services

  4. Web Server (IIS)

Correct Answer: D

Question No.52

Your network contains an Active Directory forest named contoso com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network.

You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (ADFS) farm by using a certificate that has a subject name of sts.contoso com.

You need to enable certificate authentication from the Internet on Server1.

Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.

A. 389

B.

443

C.

3389

D.

8531

E.

49443

Correct Answer: BE

Question No.53

HOTSPOT

Your network contains an Active Directory forest The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers Site1 and Site2 connect to each other by using a WAN link.

You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.

image

Server3 is the only server in Site2.

Use the drop-down menus to select the answer choice that completes each statement based on the information graphic.

image

Correct Answer:

image

Question No.54

You have a failover cluster named Cluster1.

A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.

You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.

Which tool should you use?

  1. Hyper-V Manager

  2. Failover Cluster Manager

  3. Server Manager

  4. Resource Monitor

Correct Answer: B

Question No.55

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

image

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients.

Solution: From the Security setting of each zone on Server1, you modify the permissions. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.56

You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server. You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?

  1. PPTP

  2. L2TP

  3. SSTP

  4. lKEv2

Correct Answer: D

Question No.57

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.

You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.

Solution: You create a performance counter data collector. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.58

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

image

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients.

Solution: From Windows PowerShell on Server1, you run the Export- DnsServerDnsSecPublicKey cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.59

HOTSPOT

Your company has a testing environment that contains an Active Directory domain named contoso com. The domain contains a server named Server1 that runs Windows Server 2016. Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.

image

The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.

image

For each of the following statements, select Yes if the statement is true Otherwise, select No.

image

Correct Answer:

image

Question No.60

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016.

You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.

Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Explanation:

https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 61-70

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.61

HOTSPOT

You have an Active Directory domain named Contoso com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.

You have four virtual machines that are connected to an external switch. The virtual machines are configured as shown.

image

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.62

You have a server named Server 1 thai runs Windows Server 2016. Server 1 has Internet connectivity.

You have a Nano Server image.

You need to download and save a Nano Server package in the Nano Server image. The package is NOT included in the Windows Server 2016 installation media.

Which two cmdlets should you run on Server1?

  1. Set-PackageSource

  2. Install-PackageProvider

  3. Add-AppxProvisionedPackage

  4. Save-NanoServerPackage

  5. Add-WindowsPackage

Correct Answer: BD

Question No.63

You have an Active Directory domain named Contoso com. The domain contains servers named Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

  1. From Routing and Remote Access, configure the authentication provider.

  2. From the Connection Manager Administration Kit, create a Connection Manager profile.

  3. From Server Manager, create an Access Policy.

  4. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Correct Answer: A

Question No.64

HOTSPOT

Your network contains an Active Directory forest. The forest contains two domain controllers named DC1 and DC2 that run Windows Server 2016. DC1 holds all of the operations master roles.

DC1 experiences a hardware failure.

You plan to use an automated process that will create 1000 user accounts. You need to ensure that the automated process can complete successfully. Which command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.65

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2016 installed. Server2 has Windows Server 2012 R2 installed.

Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.

Server2 contains a virtual machine named VM5.

You plan to perform a live migration of VM5 to Server1.

You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run1?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: E

Question No.66

HOTSPOT

Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.

During normal network operations, you run the following commands on DC2:

Move-ADDirectoryServerOperationMasterRole -Identity quot;DC2quot; -OperationMasterRole PDCEmulator

Move-ADDirectoryServerOperationMasterRole -Identity quot;DC2quot; -OperationMasterRole RIDMaster DC1 fails.

You remove DC1 from the network, and then you run the following command:

Move-ADDirectoryServerOperationMasterRole -Identity quot;DC2quot; -OperationMasterRole SchemaMaster

For each of the following statements, select Yes if the statement is true. Otherwise, select No

image

Correct Answer:

image

Question No.67

You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

  1. Find-NanoServerPackage

  2. Get-Package

  3. Find-Package

  4. Get-WindowsOptionalFeature

Correct Answer: B

Question No.68

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are a server administrator at a company named Contoso, Ltd.

Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

image

All of the virtual switches are of the external type.

You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.

Solution: You implement live migration by using Host3 and Host4. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Question No.69

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have two servers named Server1 and Server2 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed.

An iSCSI SAN connects to the network.

You create a LUN on the SAN and configure both servers to connect to the iSCSI target.

You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.

You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management console

  4. the configurehyperv.exe command

  5. the Disk Management console

  6. the Failover Cluster Manager console

  7. the Hyper-V Manager console

  8. the Server Manager Desktop app

Correct Answer: F

Question No.70

DRAG DROP

You have a server named Server1 that runs Windows Server 2016.

You plan to deploy Internet Information Services (US) in a Windows container. You need to prepare Server1 for the planned deployment.

Which three actions should you perform in sequence?

To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

image

Correct Answer:

image

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 71-80

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.71

Your company has 10 offices. Each office has a local network that contains several Hyper- V hosts that run Windows Server 2016. All of the offices are connected by high speed, low latency WAN links.

You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

  1. the Multipath I/O feature

  2. the Routing role service

  3. the Network Controller server role

  4. the Canary Network Diagnostics feature

  5. the Data Center Bridging feature

Correct Answer: CE

Question No.72

You need to modify the GPO prefix by IPAM. What should you do?

  1. Run theSet-lpamConfigurationcmdlet

  2. ClickProvision the IPAM serverin Server Manager.

  3. ClickConfigure server discoveryin Server Manager.

  4. Run thelnvoke-lpamGpoProvisioningcmdlet

Correct Answer: A

Question No.73

You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use?

  1. Set-NetNeighbor

  2. Remove-VMSwitchTeamMember

  3. Set-VMSwitch

  4. Enable-VMSwitchExtension

Correct Answer: C

Question No.74

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest.

You install Windows Server 2016 on 10 virtual machines.

You need to deploy the Web Server (IIS) server role identically to the virtual machines.

Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.75

Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of Repeated Scenario:

A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.

The WSUS deployment contains one upstream server that is located on the company#39;s perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.

You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.

image

The CIO of Contoso identifies the following requirements for the company#39;s IT department: Deploy failover cluster to two new virtual machines.

image

Store all application databases by using Encrypted File System (EFS).

image

image

Ensure that each Windows container has a dedicated IP address assigned by a DHCP server. Produce a report that lists the processor time used by all of the processes on a server named

Server 1 for five hour.

Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.

image

Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.

End of Repeated Scenario.

What should you do to prepare the data volume on HRServer5 to store the databases required for the human resources application?

  1. Format the data volume by using ReFS.

  2. Enable Trusted Platform Module (TPM) on HRServer5.

  3. Format the data volume by using NTFS.

  4. Enable BitLocker Drive Encryption (BitLocker) on the data volume.

Correct Answer: C

Question No.76

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

image

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.

Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.77

You are configuring a Windows Server 2016 failover cluster in a workgroup.

Before installing one of the nodes, you run the ipconfig /all command and receive the following output.

image

You need to ensure that Server 1 can be added as a node in the cluster. What should you do?

  1. Assign a static IP address

  2. Change the Node Type to Broadcast

  3. Configure a DNS suffix

  4. Enable NetBIOS over TCP/IP

Correct Answer: C

Question No.78

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of Repeated Scenario:

Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

image

The virtual machines are configured as follows:

image

Each virtual machine has one virtual network adapter

image

VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.

image

All of the servers on the network can communicate with all of the virtual machines.

End of repeated Scenario.

On server4, you plan to provision a new volume that will be used to create large, fixed-size VHDX files.

Which type of file system should you use the new volume to minimize the amount of time required to create the VHDX files?

  1. ReFS

  2. NTFS

  3. CVFS

  4. exFAT

Correct Answer: A

Question No.79

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled. You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.

Which cmdlet should you run?

  1. Add-VMNetworkAdapterAcl

  2. Set-VMNetworkAdapter

  3. New-VMResourcePool

  4. Set-VMNetworkAdapterRoutingDomamMapping

Correct Answer: A

Question No.80

In this section, you#39;ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

image

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients.

Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 81-90

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.81

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest.

You install Windows Server 2016 on 10 virtual machines.

You need to deploy the Web Server (IIS) server role identically to the virtual machines.

Solution: You use Windows PowefShell Desired State Configuration (DSC) to create a default configuration and then you apply the configuration the virtual,

  1. Yes

  2. No

Correct Answer: A

Explanation:

https://www.simple-talk.com/sysadmin/powershell/powershell-desired-state-configuration-the- basics/

Question No.82

You have a server named Server1 that runs Windows Server 2016. The Windows Server 2016 installation media is mounted as drive D.

You copy the NanoServerImageGenerator folder from the D:\NanoServer folder to the C:\NanoServer folder.

You need to create a custom Nano Server image that includes the Hyper-V server role. The image will be used to deploy Nano Servers to physical servers.

Which two commands should you run? Each correct answer presents part of the solution.

  1. New-NanoServerImage -Edition Standard -DeploymentType Guest -MediaPath D:\ – TargetPath .\NanoServerImage\NanoServer.wim -Compute

  2. Install-PackageProvider NanoServerPackage

  3. Import-PackageProvider NanoServerPackage

  4. New-NanoServerImage -Edition Standard -DeploymentType Host -MediaPath D:\ – TargetPath .\NanoServerImage\NanoServer.wim -Compute

  5. Import-Module C:\NanoServer\NanoServerImageGenerator

Correct Answer: DE

Question No.83

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have three servers named Server1, Server2. Server3 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed Server3 has the iSCSI Target Server role service installed.

image

You need to create a Hyper-V cluster.

Which tool should you use first?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management console

  4. the configurehyperv.exe command

  5. the Disk Management console

  6. the Failover Cluster Manager console

  7. the Hyper-V Manager console

  8. the Server Manager Desktop app

Correct Answer: H

Question No.84

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016.

You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.

Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Explanation:

https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

Question No.85

HOTSPOT

You have a server named Served that runs Windows Server 2016. Server1 has the Windows Application Proxy role service installed. You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

image

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Question No.86

HOTSPOT

You have a server named Server1 that runs Windows Server 2016 server.

Server1 has the Docker daemon configured and has a container named Container1.

You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1. Which command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.87

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

  1. the Network Policy and Access Services server role

  2. the Remote Access server rote

  3. the Data Center Bridging feature

  4. the Network Controller server role

Correct Answer: B

Question No.88

HOTSPOT

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.

The WSUS deployment contains one upstream server that is located on the company#39;s perimeter

network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.

You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.

image

The CIO of Contoso identifies the following requirements for the company#39;s IT department: Deploy a failover cluster to two new virtual machines.

image

Store all application databases by using Encrypted File System (EFS).

image

image

Ensure that each Windows container has a dedicated IP address assigned by a DHCP server. Produce a report that lists the processor time used by all of the processes on a server named

Server1 for five hours.

image

Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.

image

Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.

You need to create a Data Collector Set to meet the requirement for the processor time report. What command should you run to create the Data Collector Set?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.89

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.

You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.

Solution: You create a system configuration information data collector. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.90

Your network contains three Hyper-V hosts. You add all of the hosts to a cluster. You need to create highly available storage spaces that connect to directly attached storage on the hosts. Which cmdlet should you use?

  1. Enable-ClusterStorageSpacesDiret

  2. Set-StoragePool

  3. Add-ClusterDisk

  4. Update-ClusterVirtualMachineConfiguration

Correct Answer: A

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 91-100

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.91

DRAG DROP

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

image

The virtual machines are configured as follows:

image

Each virtual machine has one virtual network adapter.

image

VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.

image

All of the servers on the network can communicate with all of the virtual machines.

You need to install the correct edition of Windows Server 2016 to support the planned changes for Server2, Server3, Server4, and Server5.

Which edition or editions should you choose for each server?

To answer, drag the appropriate editions to the correct servers. Each edition may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image

Correct Answer:

image

Question No.92

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a server named Server1 that runs Windows Server 2016.

Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.

You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.

Solution: You create a performance counter alert data collector. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Question No.93

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016 You plan to deploy several shielded virtual machines on Server1.

You deploy a Host Guardian on a new server.

You need to ensure that Server1 can host shielded virtual machines. What should you run first?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: G

Question No.94

DRAG DROP

You are planning the configuration of a virtual network switch for a Hyper-V environment. The environment will contain the following Hyper-V hosts:

image

A server named Server1 will have 10 virtual machines that must be able to communicate with each other. The virtual machines must be prevented from communicating with Server1 and all other servers on the corporate network.

image

A two-code failover cluster named Cluster1 will have 20 virtual machines. The virtual machines will run on both nodes. Hyper-V hosts on the corporate network must be able to connect to the virtual machines.

Which type of virtual switch should you select for each Hyper-V host?

To answer, drag the appropriate virtual switch types to the correct hosts. Each virtual switch type must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image

Correct Answer:

image

Question No.95

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.

You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: F

Question No.96

Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of Repeated Scenario:

Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

image

The virtual machines are configured as follows:

image

Each virtual machine has one virtual network adapter

image

VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.

image

All of the servers on the network can communicate with all of the virtual machines.

End of repeated Scenario.

You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.

What should you do?

  1. Configure the virtual machines as shielded virtual machines.

  2. Run the Set-VMProcessor cmdlet and specify the -EnableHostResourceProtection Parameter.

  3. Run the Set-VMProcessor cmdlet and specify the -MaximumCountPerNumaNode Parameter.

  4. Configure VM Network Adapter Isolation.

Correct Answer: B

Question No.97

DRAG DROP

You have a network that contains several servers that run Windows Server 2016.

You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:

image

Install the Web Server server role.

image

Start the World Wide Web Publishing service. How should you configure the DSC resources?

To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image

Correct Answer:

image

Question No.98

HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You publish an application named App1 by using the Web Application Proxy.

You need to change the URL that users use to connect to App1 when they work remotely. Which command should you run?

To answer, select the appropriate options in the answer area

image

Correct Answer:

image

Question No.99

HOTSPOT

You have a server that runs Windows Server 2016. You run the commands shown in the following output PS G:\gt; Get-DedupVolume | f1

image

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

image

Correct Answer:

image

Question No.100

Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016.

Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.

You install the Data Deduplication role service on Server1.

You need to implement Data Deduplication for volumes on D: and E:.

Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and Enable- DeDupVolume -Volume D:,E:.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 41-50

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.41

DRAG DROP

You are deploying DirectAccess to a server named DA1. Da1 will be located behind a firewall and will have a single network adapter The intermediary network will be IPv4.

You need to configure firewall to support DirectAccess. Which firewall rules should you create for each type of traffic?

To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image

Correct Answer:

image

Question No.42

HOTSPOT

You have a Hyper-V host that runs Windows Server 2016 The Hyper-V host has a virtual machine named VM1.

You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2016. You plan to create multiple virtual machines that will use the generalized image.

You need to create differencing disks based on VHD1 vhdx. What command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.43

Note This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are a server administrator at a company named Contoso, Ltd.

Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

image

All of the virtual switches are of the external type.

You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.

Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?

  1. Yes

  2. No

Correct Answer: B

Question No.44

HOTSPOT

Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm.

You install Windows Server 2016 on a server named Server2.

You need to configure Server2 as a node in the federation server farm. Which cmdlets should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.45

HOTSPOT

Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1.

Server1 configured to use a forwarder named server2.contoso.com that has an IP address of 10.0.0.10.

You need to prevent Server1 from using root hints if the forwarder is unavailable. What command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.46

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

image

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.

Solution: From a Group Policy object (GPO) in tne domain, you modify the Network List Manager Policies.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.47

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

  1. Network Controller and Windows Server Network Load Balancing (NLB) nodes

  2. Network Controller and Windows Server Software Load Balancing (SLB) nodes

  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes

  4. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Correct Answer: D

Question No.48

HOTSPOT

Your network contains an Active Directory domain named contoso.com The domain contains a domain controller named Server1 and a member server named Server2.

Server1 has the DNS Server role installed Server2 has IP Address Management lPAM installed. The IPAM server retrieves zones from Server1 as shown in the following table.

image

image

Correct Answer:

image

Question No.49

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016 and a two-node scale- out file server cluster named Cluster1.

A virtual machine named VM1 runs on Server1.

You need to migrate the storage on VM1 to Cluster1. Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management console

  4. the configurehyperv.exe command

  5. the Disk Management console

  6. the Failover Cluster Manager console

  7. the Hyper-V Manager console

  8. the Server Manager Desktop app

Correct Answer: G

Question No.50

You have a server that runs Windows Server 2016.

The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4 and Disk5.

A virtual disk named VirtualDisk1 is stored in pool1. VirtualDisk1 uses the panty storage layout. Disk3 fails.

You need to remove Disk3 from Pool1.

Which two commands should you run? Each correct answer presents part of the solution.

  1. Update-StoragePool -FriendlyName Pool1

  2. Set-ResiliencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault 4

  3. Reset-PhysicalDisk -FriendlyName Disk3

  4. Set-PhysicalDisk -FriendlyName Disk3 -Usage Retired

  5. Remove-PhysicalDisk -FriendlyName Disk3

Correct Answer: DE

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 1-10

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.1

You have a server named Server 1 that runs Windows Server 2016 The disk configuration for Served is shown in the exhibit

image

You add Server1 to a cluster

You need to ensure that you can use Disk1 or Storage Spaces Direct What should you do first?

  1. Delete Partition (E:)

  2. Set Disk1 to offline.

  3. Convert Disk 1 to a dynamic disk

  4. Convert Partition (E:) to ReFS

Correct Answer: A

Question No.2

HOTSPOT

Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1

You enable Response Rate Limiting on Server1.

You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24.

Which cmdlets should you run?

To answer, select the appropriate options in the answer area

image

Correct Answer:

image

Question No.3

Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location.

A virtual machine named VM1 runs on Cluster1 You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management console

  4. the configurehyperv.exe command

  5. the Disk Management console

  6. the Failover Cluster Manager console

  7. the Hyper-V Manager console

  8. the Server Manager Desktop app

Correct Answer: G

Question No.4

DRAG DROP

Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2012 R2 installed. Server2 has Windows Server 2016 installed.

You perform a live migration of a virtual machine named VM1 from Server1 to Server2. You need to create a production checkpoint for VM1 on Server2.

Which three Windows PowerShell cmdlets should you run in sequence?

To answer, move the appropriate Windows PowerShell cmdlets from the list of actions to the answer area and arrange them in the correct order.

image

Correct Answer:

image

Question No.5

Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.

You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

  1. RunNew-SRPartnershipand specify the -RephcationModeparameter.

  2. install the Failover Clustering feature and create a new cluster resource group.

  3. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

  4. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Correct Answer: A

Question No.6

You have an Active Director domain named Contoso.com. The domain contains servers named Server 1, Server2 and Server3 that run Windows Server 2016.

Server1 and Server2 are nodes in a Hyper V cluster named Cluster1. You add a Hyper V Replica Broker role named Broker 1 to Cluster 1.

Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.

Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only.

You need to ensure that you can perform the migration of VM1 to Server2 What should you do?

  1. Modify the Storage Migration settings on Server3

  2. Modify the Cluster Permissions for Cluster1.

  3. Add the Server3 computer account to the Replicator group on Server1 and Server2.

  4. Modify the Delegation settings for the Server3 computer account.

Correct Answer: D

Explanation:

https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx#BKMK_Step1

Question No.7

You have a server named Server1 that runs Windows Server 2016 You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

  1. Run the New-NetFirewallRulecmdlet

  2. Run the Set-ServiceWindows PowerShell cmdlet.

  3. Edit the daemon.json file.

  4. Edit the configuration json file

Correct Answer: C

Question No.8

Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a two-node Hyper-V cluster named Cluster1. As virtual machine named VM1 runs on Cluster1.

You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management console

  4. the configurehyperv.exe command

  5. the Disk Management console

  6. the Failover Cluster Manager console

  7. the Hyper-V Manager console

  8. the Server Manager Desktop app

Correct Answer: F

Question No.9

Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016 Server1 has a virtual machine named VM1 that uses a single VHDX file VM1 is configured shown in the following table.

image

You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines. You need to ensure that VM1 can be used to deploy shielded virtual machines. What should you run?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: B

Question No.10

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution Determine whether the solution meets the stated goals.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso com has the following configuration.

image

You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration. You need to configure Active Directory to support the planned deployment.

Solution: You upgrade a domain controller to Windows Server 2016. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 11-20

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.11

You have a server named Server1 that runs Windows Server 2016. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.

You configure NIC Teaming on VM1 as shown in the exhibit.

image

image

You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?

  1. From Hyper-V Manager on Server1, modify the settings of VM1.

  2. From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.

  3. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

  4. From the properties of the NIC team on VM1. change the load balancing of the NIC team.

Correct Answer: A

Question No.12

You deploy a Hyper-V server named Served in an isolated test environment The test environment is prevented from accessing the Internet Server1 runs the Datacenter edition of Windows Server 2016.

You plan to deploy the following guest virtual machines on the server.

image

Which activation model should you use for the virtual machines?

  1. Multiple Activation Key (MAK)

  2. Automatic Virtual Machine Activation (AVMA)

  3. Original Equipment Manufacturer (OEM) key

  4. Key Management Service (KMS)

Correct Answer: B

Question No.13

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution Determine whether the solution meets the stated goals.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso com has the following configuration.

image

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration. You need to configure Active Directory to support the planned deployment.

Solution: You raise the forest functional level to Windows Server 2012 R2. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.14

HOTSPOT

You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host.

You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)

-capable.

You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1.

The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards

Which command should you run first?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.15

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are a server administrator at a company named Contoso, Ltd.

Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

image

All of the virtual switches are of the external type.

You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.

Solution: You implement a Hyper-V Replica between Host2 and Host4.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.16

You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.

To each server you attach a new 4-TB SATA hard disk.

You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.

Which command should you run before you enable Storage Space Direct?

  1. Add-ClusterSharedVolume -Name quot;Disk 1quot; -Cluster Cluster1

  2. New-Cluster -Name Cluster1 -Node `Server1#39;, `Server2#39;, `Server3#39;, `Server4#39; – NoStorage

  3. Get-ClusterAvailableDisk -Cluster Cluster1 | Add-ClusterDisk

  4. New-ClusterStorageEnclosure -id 1 -name Cluster1 -type jbod -ConnectionString quot;Server1,Server2,Server3,Server4quot;

Correct Answer: B

Question No.17

Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016 Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space.

You need to reduce the amount of disk space used by the VHD. What should you run?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: H

Question No.18

HOTSPOT

You have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.

You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network. Which command should you run on the Hyper-V host?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.19

HOTSPOT

You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed. You open Disk Management on Server1 as shown in the following graphic.

image

You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Question No.20

You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2.

On Node1, you create a virtual machine named VM01 by using Hyper-V Manage.

You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable. What should you do?

  1. From Failover Cluster manager, run the configure Role actions.

  2. From Hyper-V Manager, click VM01 and click Enable Replication.

  3. From Hyper-V Manager Click Node 1 and the modify the hyper-V settings.

  4. From Windows Powershell, run the Enable-VMReplication cmdlet.

Correct Answer: A

Explanation:

http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

Get Full Version of 70-740 Dumps

Categories
70-740 Dumps

70-740 Real Exam Dumps Questions and answers 21-30

Get Full Version of the Exam
http://www.EnsurePass.com/70-740.html

Question No.21

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016.

You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.

Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Explanation:

https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

Question No.22

HOTSPOT

Your network contains an Active Directory domain named contoso com The domain contains tour servers named Server 1. Server2. Server3. and Server4 that run Windows Server 2016.

Server 1 and Server2 are nodes in Hyper-V cluster named Cluster1 You have a highly available virtual machine named VM1.

Server1 is the owner node of VM1 Server3and Server4 are nodes of a scale-out file server named Cluster2.

The storage on Server1 is configured as shown in the following table.

image

You need to move the virtual disk of VM1 to a different location. What should you do?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.23

HOTSPOT

You implement a Windows Server 2016 failover cluster named Cluster1 as a highly available file server.

You run the Get-Cluster cmdlet and receive the following output.

image

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Question No.24

You have a Nano Server named Nano1.

You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1.

What should you run?

  1. the Install-NanoServerPackage cmdlet

  2. the Install-WindowsFeaturecmdlet

  3. the docker load command

  4. the docker run command

Correct Answer: D

Question No.25

DRAG DROP

You have a server named Server1 that runs Windows Server 2016. You need to deploy the first node cluster of a Network Controller cluster Which four cmdlets should you run in sequence?

To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order

image

Correct Answer:

image

Question No.26

You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V server role installed.

On Server1, you plan to create a virtual machine named VM1. You need to ensure that you can start VM1 from the network.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

  1. Create a generation 2 virtual machine.

  2. Create a generation 1 virtual machine and run theEnable- NetAdapterPackageDirectcmdlet.

  3. Create a generation 1 virtual machine that has a legacy network adapter.

  4. Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network adapter.

Correct Answer: AC

Question No.27

DRAG DROP

Your network contains an Active Directory domain named contoso com The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.

You need to integrate IPAM and VMM.

Which types of objects should you create on each server?

To answer, drag the appropriate object types to the correct servers Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image

Correct Answer:

image

Question No.28

In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.

Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution Determine whether the solution meets the stated goals.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso com has the following configuration.

image

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration. You need to configure Active Directory to support the planned deployment.

Solution: You raise the domain functional level to Windows Server 2012 R2. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Question No.29

HOTSPOT

Your network contains an Active Directory domain named contoso com. The domain contains a member server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM.

You need to configure the environment for automatic IPAM provisioning. Which cmdlet should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.30

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains four virtual machines that are configured as shown in the following table.

image

To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?

  1. VM1, VM2, VM3 and VM4

  2. VM4 only

  3. VM1 and VM2 only

  4. VM3 and VM4 only

  5. VM2 only

Correct Answer: D

Get Full Version of 70-740 Dumps